To return to the previous display
If you press the [EXIT] switch or the [FUNCTION] switch, the [FUNCTION] switch indicator will go dark, and you will return to the previous LCD screen.
When the power is turned on, this setting will automatically be Local On.
Synchronizing to an external sequencer
An external sequencer or drum machine connected via MIDI can be synchronized to the
1 | Press the [FUNCTION] switch |
2 | Access the “Func 4/10” page |
|
3 | Select a “Sync.” radio button |
Press either the “Int.” or the “Ext.” radio |
button.
“Int.”: The internal clock will be used. Select “Int.” when you are using the SP- 500 by itself, or when using it as the mas- ter (controlling device) to synchronize external MIDI devices to the MIDI clock transmitted by the
“Ext.”: The
To return to the previous display
If you press the [EXIT] switch or the [FUNCTION] switch, the [FUNCTION] switch indicator will go dark, and you will return to the previous LCD screen.
MIDI Transpose
You can specify whether the “Transpose” setting of the “Func 1/10” page will be applied to the data that is transmitted or received via MIDI.
1 | Press the [FUNCTION] switch |
2 | Access the “Func 4/10” page |
|
3 | Select one of the “MIDI Trans- |
pose” radio buttons |
Press either the “Tx” or “Rx” radio but- ton.
“Tx”: Transpose will apply to the trans- mitted note data that you input from the keyboard. It will not affect the received note data.
“Rx”: Transpose will apply to the received note data.
It will not affect the transmitted note data.
MIDI Filter
You can specify whether or not each type of MIDI message (e.g., program change, control change) will be transmitted and received.
1 | Press the [FUNCTION] switch |
|
2 | Access the “Func 5/10” page | Functions |
| ||
|
|
3 | For the types of MIDI message |
that you do not wish to transmit |
or receive, select the correspond- ing check box to turn it off
“Prog.”: Program change
Programs of a connected MIDI device can be changed by transmitting program changes from the
71