Phone information

You can access information regarding your phone. Select Menu > Settings > My Phone > Phone Info and one of the following:

Build Info shows specific software and hardware information.

Icon Keys shows the icons used by your phone.

Network

Data and fax calls

Your phone may be able to receive certain data or faxes, depending on the system sending the information. You cannot receive voice calls while the phone is in data/fax mode.

To receive data or faxes, you must connect the phone to a laptop or PC and switch the phone from voice mode to data/fax mode.

Note: To purchase a cable, visit

www.kyocera-wireless.com/store.

To enable data/fax mode, select Menu > Settings > Network > Data/Fax Calls and of the following:

Voice Only turns data/fax mode off.

Fax, next call or Data, next call sets the phone to data/fax mode for the next incoming call or the next ten minutes.

Fax, until off or Data, until off sets the phone to data/fax mode until the phone is turned off.

Privacy alert

You set your phone to alert you when enhanced digital CDMA privacy is lost or regained. Select Menu > Settings > Network > Privacy Alert > Enabled.

Voice privacy

Set your phone to use enhanced digital CDMA privacy. Select Menu > Settings > Network >

Voice Privacy > Enhanced.

Data setup

Set your phone’s connection type for data applications. Select Menu > Settings > Network > Data Setup and one of the following:

Automatic select the best connection type based on your service.

QNC Only allows only standard circuit- switched calls.

1XRTT Only allows the use of high-speed packet data.

User name

Allows you to set a user name and password if your phone is data enabled.

1.Select Menu > Settings > Network > User Name.

2.Enter or modify your user name. Select Next.

3.Enter or modify your password. Select Done.

48

Network

Page 56
Image 56
Kyocera E1000 manual Network