Kyocera E1000 manual Auto answer, Power backlighting, Com port speed, TTY device, Hearing aid

Auto answer

When a headset or hands-free kit is attached to your phone, the phone can be set to answer automatically.

To turn auto answer on, Select Menu > Settings > Accessories > Auto-Answer> After 5 Seconds. It will automatically answer after 5 seconds.

Power backlighting

You can set backlighting to remain on when an external power source, such as the AC adapter, is used with the phone.

Note: Power backlighting may not be available with the optional desktop charger or other accessories.

Select Menu > Settings > Accessories > Pwr Backlighting and one of the following.

•Normal sets power backlighting to normal.

•Always On keeps power backlighting when

an accessory.

Tip: Use the power backlighting as a night light when traveling.

Com port speed

The Com Speed sets the data rate at which your phone connects to a laptop or PC.

Select Settings > Accessories > Com Port Speed and a speed. There may be a higher charge for making calls using high-speed data in areas where 1X service is available. Check with your service provider for details.

TTY device

You can connect the phone to a teletype (TTY) device for the hearing impaired.

Note: Enable TTY only when using the phone with a TTY device.

1.Connect the TTY device to the phone.

2.Enter ##889 with your keypad and select TTY. or, select Menu > Settings > Accessories > TTY Device.

3.You will see a notification, select OK.

4.Select TTY On to connect or TTY Off to not connect.

Hearing aid

Enable your phone to operate with a T-coil Hearing Aid device. Select Menu > Settings > Accessories > Hearing Aid > OK > Enabled. Note: Enable Hearing Aid only when being used with T-coil Hearing Aid device.

52 Accessories