Kyocera FS-1700 1-20, Multi-PurposeTray Feeding, Feeding Envelopes, Overhead Projection OHP Film

1.5. Multi-Purpose Tray Feeding

Feeding Envelopes

Envelopes should be fed face up, right side first, as shown below. From the MODE SELECT menu, set the printer to print in landscape page orientation.

☛ To avoid trouble, we recommend that

envelopes are delivered face-up. Use	Envelope
the STACK key on the printer control
panel to select the face-up tray.

Not all envelopes print well. See Appendix B for details on suitable types of envelopes.

See page 2-3for the envelope sizes that can be set.

First Mode(Automatic Manual Feeding)

The printer automatically feeds the paper placed on the multi-purpose tray regardless of the cur- rent paper source selection. To use the first mode (automatic manual feeding mode), simply place a sheet of paper on the multi-purpose tray in the same manner as above, even while the printer is presently feeding the paper in the printer's cassette.

1.Press the MODE key to display     .

2.After pressing the ENTER key, the mode display is changed by pressing the + and - keys. Use these keys to display #, and then press the ENTER key.

   	
#

3.Press the EXIT key.

☛
The printer will not switch to light the multi-purpose tray indicator while the paper is fed manually using the automatic manual feeding mode.

The automatic manual feed is not available if the printer is installed with the duplexer and/or the sorter, and if the option unit is selected for use.

Overhead Projection (OHP) Film

To avoid trouble, OHP film must be fed manually in the manner described above.

Requirements regarding OHP film are also given in Appendix B.

☛OHP film must be delivered face-up. Use the STACK key on the printer control panel to select the face-up tray.

1-20