4.2. Cleaning
Cleaning the Grid
1.Take the grid cleaner from protective bag in the
new toner kit, and remove the cap. | Protective Bag | Cap |
☛ The grid cleaner pad is impregnated with water. Perform the following cleaning procedure before the pad dries.
2.Attach the grid cleaner to the printer with the
pad uppermost, as shown in the diagram.
3.After attaching the grid cleaner, repeat the action of slowly pulling out and then pushing back in the main charger unit at least 5 times.
It is easier to pull out the main charger for the first time if it is raised slightly, as shown in the
figure.(3)
The grid part underneath the main charger is cleaned by this procedure.
Grid Cleaner
Grid Cleaner
(1)
(2)
Main Charger Unit
4.When the grid is clean, remove the grid cleaner from the printer and dispose of it. The grid cleaner is not
5.After cleaning the charger wire, push the cleaning knob all the way in and close the
side cover.
