1.7. Memory Expansion Installation
1.7. Memory Expansion Installation
In this section is explained how to expand the printer's memory. Expanded printer memory enables you to print more complex pages, download more fonts, and define more macros.
It begins by explaining how to remove the main circuit board from the printer, and explains how to install a SIMM (single
☛The expansion memory should be installed only by a Kyocera authorized dealer or Kyocera certified technician. Kyocera shall not be liable for damage due to improper installation of the expansion memory.
The minimum memory requirements for the printer with various options installed are listed in the table below. Please refer to this table when expanding the printer's memory.
Printing condition | Resolution | ||
300 dpi | 600 dpi | ||
| |||
HP LaserJet 5M/KPDL | 4 MB | 4 MB | |
|
|
| |
HP LaserJet 5M/KPDL, duplex mode = on | 4 MB | 5 MB | |
|
|
| |
HP LaserJet 5M/KPDL resource protection, | – | 10 MB | |
duplex mode = None, | |||
|
| ||
|
|
| |
HP LaserJet 5M/KPDL, resource protection, | – | 14 MB | |
duplex mode = on, | |||
|
| ||
|
|
| |
Removing the Main Circuit Board
The main circuit board of the printer is equipped with two sockets for memory expansion. Expan- sion memory is available in the form of a SIMM.
☛The following instructions are intended for the technician only.
Notes on Handling the Main Circuit Board and SIMM
Protect the electronics by taking these precautions:
❒Before touching the main circuit board, touch a water pipe or other large metal object to discharge yourself of static electricity. While doing the work, it is recommended that you wear an antistatic wrist strap.
❒Touch the main circuit board and SIMM only by the edges.
