5.4. Print Quality Problems
Faint or blurred printing
Check the control panel.
If the .&/( message is displayed and the 
indicator is flashing, install a new toner kit. See Section 4.1.
Set the print density from the control panel to a higher level than the current setting. See Section 2.8.
Set the control panel setting to 1 2.
Check the Ecoprint setting.
See Section 2.6.
Grey background
Check the control panel.
If the .&/( message is displayed and the 
indicator is flashing, install a new toner kit. See Section 4.1.
Check the print density.
Display the print density menu from the control panel and select a lighter density setting. See Sec- tion 2.8.
Clean the main charger wire.
Open the printer's side cover. Pull the green main charger wire cleaning knob slowly in and out a few times. See Section 4.2.
