Kyocera FS-1700 user manual Control Keys, Key Function

2.1. Control Panel

Control Keys

The control panel keys are used to configure the printer.

☛ Settings made with these keys effect only the interface currently in use.

	Key		Function
	ON LINE	Switches the printer on-line and off-line.
	CONTINUE	1. Depending on the message being indicated, there are cases where operation
		will continue after pressing the CONTINUE key. If such a message is displayed,
		operation will be resumed after pressing this key. (See Table 5.3)
		2.Used as the	key in the mode selection function.
	STACK	1. Selects whether printed pages are delivered to the face-down, face-up tray, or
		optional sorter/stacker (if installed).
		2. Lets you access the desired item or enter numeric values. In some of the control
		procedures, the	(CONTINUE) and (FORM FEED) keys are used to enter or exit
+
		the sub items.
	FORM FEED	1. Prints and feeds out one page.
		2. Used as the	key in the mode selection function.
		Abandons a printing job, resets numeric values, or cancels a setting procedure.
	CANCEL
	EXIT	1. When pressed during mode selection, terminates the setting and returns to the
		Ready condition.
		2. Used to select the emulation, font, character code set; to read an memory card;
		to select the automatic cassette mode; and others (See the last page in this man-
	MODE
		ual.).
	–	1. Enables access to the desired item or entering of numeric values. In some of
		the control procedures, the (CONTINUE) and (FORM FEED) keys are used to
		enter or exit the sub items.
	FEED	2. Selects the cassette feed or multi purpose tray feed.
	ENTER	1. Finalizes numeric values and other selections.
		2. Prints a page of status information on all interfaces together (The printer must
		be on-line.).
	STATUS

☛Most of the panel functions can also be controlled by PRESCRIBE IIe commands or commands generated by application software. The printer obeys the most recently received printer settings sent from the application software, or from the printer driver, which take priority over control panel settings.

2-5