Kyocera KM-2540 manual

IMPORTANT When using media types other than plain paper (such as recycled or colored paper), always specify the media type setting. (Refer to Specifying the Media Type for the Cassettes on page 2-8.)

The cassettes can hold 60 to 120 g/m² paper. When using 120 g/m² paper, specify [Thick paper] for Specifying the Media Type for the Cassettes on page 2-8. If the media type setting is wrong, paper jams and deterioration of copy quality may occur.

1Pull the cassette out toward you until it stops.

Note Do not pull out more than one cassette at a time.

2Holding the paper width adjusting tab, move the paper width guides to fit the paper.

Note Paper sizes are marked on the cassette.

3Adjust the paper length guide to the length of the paper.

A

B

Note Paper sizes are indicated on the cassettes.

To change between inch size and metric size (A, B sizes), follow the steps below to adjust the size switch.

1Holding the paper width adjusting tab, move the paper width guide to a position other than that of the paper.

2Turn the size switch A 90°. >

3Move the size lever B up (C) or down (I). C: metric size (centimeters) (A, B sizes) I: inch size

4Turn the size switch 90° to lock it. >

Preparation for Usage 2-3