2Place the originals. Put the side to be scanned (or the first side of
IMPORTANT Confirm that the original width guides exactly fit the originals. If there is a gap, readjust the guides. The gap may cause the originals to jam.
Ensure that loaded originals do not exceed the level indicator. If exceeded, originals may jam (see the figure).
Originals with punched holes or perforated lines should be placed such that the holes or perforations will be scanned last (not first).
Original placement indicator
The original placement indicator is lit depending on how originals are placed.
Indications and their status are as follows.
•Green (upper indicator) lit: Original is placed properly.
•Green (upper indicator) blinking: Original is not placed properly. Remove and place again.
•Red (lower indicator) blinking: Original is jammed. Remove the jammed original and place it properly.
Preparation for Usage |
