A

9Align the grid cleaner with the notch and attach it to the machine.

10While gently holding the grid cleaner in place with your left hand, pull the main charger out fully and then push it back to a position where the roller A does not quite reach the white pad on the grid cleaner.

Repeat 2 or 3 times.

IMPORTANT When pushing the main charger back in, take care not to push it all the way in. This could result in damage to copies.

11With the main charger pulled out about 5 cm (2 inches), remove the grid cleaner. Then push the main charger back in fully, applying pressure in the direction shown by the arrow so that the main charger is in its designated position.

12Install a new waste toner box.

13Remove cleaning brush (blue colored).

Maintenance

5-9

Page 79
Image 79
Kyocera KM-2540 manual