Loading Originals
Follow the steps below to load originals for copying.
Loading Originals on the Platen
You may place books or magazines on the platen in addition to ordinary sheet originals.
1Open the original cover.
Note Open the optional document processor instead if installed. Before opening the document processor, be sure that there are no originals left on the original table or on the original eject table. Left originals may fall off when the document processor is opened.
Keep the document processor open if the original is 40 mm or thicker.
2Place the original. Put the scanning side facedown and align it flush against the original size indicator plates with the back left corner as the reference point.
Original size indicator plates (Inch models)
Preparation for Usage |
