Lennox Hearth II-T C FS Remove Window Wash Bracket, Remove 4 Screws, Opening Side Panels

ROUTINE MAINTENANCE

WINDOW WASH

Periodically remove four screws which secure the win- dow wash bracket to the door frame, using a 1/4” socket. Lift out the widow wash bracket, and set aside. Using a small brush, sweep out all debris buildup from behind the window wash bracket. After all debris has been removed re-attach the window wash bracket.

Remove Window Wash Bracket

Remove 4 Screws

Sweep Away Debris from Behind Window Wash Bracket.

Minimum Frequency of 1 year

REAR STOVE COMPARTMENT (All Models)

The rear stove compartment should be cleaned periodi- cally (a minimum of once a year). DISCONNECT ELEC- TRICAL CORD PRIOR TO CLEANING STOVE. Any household dust, pet hair or sawdust should be vacuumed or wiped out of the rear compartment of the stove, room air blower, and combustion blower (paying special atten- tion to vacuuming out the intakes of both blowers). The electrical components should be wiped clean.

OPENING SIDE PANELS

Advantage II-T C FS – For right hand side panel open the glass door, locate the 2 screws at front edge and re- move using a 5/16” nut driver. Repeat procedure for left hand side panel with door closed. Reinstall screws to prevent panel from opening accidentally!

Advantage II-T C FS – Opening Side Panels

(Remove the 2 screws indicated by arrows in following picture)

Remove Side Panel Screws

Stove

Front

Swing Door Open

PAGE 29

www.PelletKing.com