SPECIFICATIONS - Advantage II-T C INS
Flue Size |
| 3” Standard |
Width, Overall front (w/o surround) | 25” | |
Width, Overall back (w/o surround) | 24 1/4” | |
Depth, Overall (w/o surround) |
| 24 3/4” |
Height, rear (w/o surround) |
| 19 3/4” |
Height, front (w/o surround) |
| 22 3/4” |
Floor to Rear |
| 8 1/2” |
Flue Center |
| |
Fireplace Face to Rear |
| 17 3/8” |
Flue Outlet Center (3” tee) |
| |
Dimensions into Fireplace |
| 20 1/8” |
Minimum Height |
| |
Minimum Width @ Front |
| 32” |
(extends back 1 ½”) |
| |
Minimum Width @ Back |
| 24 5/8” |
Minimum Depth |
| 17 3/4” |
Facing Back of Unit, |
|
|
Right Outside Edge of Unit |
| 5” |
to Center of Rear Flue Outlet |
| |
Floor to Rear |
| 1 5/8" |
Outside Air Inlet |
| |
Facing Back of Unit, |
|
|
Right Outside Edge of Unit |
| 13” |
to Center of Air Inlet |
| |
Floor Protection |
| Front: • 6” |
Requirements |
| |
Standard Features |
| Fastfire Self Igniter |
|
| Wall Thermostat (wire |
|
| included) |
Hopper Capacity |
| 60 lbs. |
Burn time | ♦ | |
Fuse, Control Board |
| 5 Amp, 250 VAC * |
Fuse, Igniter |
| 6 Amp, 125 volt * |
Heat Input (Max.) | ♦ | |
Emissions | ♦ | 2.3 gr / hr (varies w/size |
|
| and type of fuel) EPA |
|
| Certified. |
Ship Weight |
| 200 lbs. |
Auger Motor |
| 1 RPM; .55 Amps |
Room Air Blower |
| 150 CFM; 1.5 Amps |
Exhaust Blower |
| 95 CFM: .95 Amps, 3000 |
|
| rpm |
Options |
| Log Set |
|
| Gold Trivet |
|
| Surround Trim Kit, Gold |
FRONT VIEW
Sm. 40 ¾", Med. 44", Lg. 48"
24 ¾"
Sm. 28 ½"
Med. 32"
Lg. 36"
SIDE VIEW
Note: Dimensions shown are approximations only (+/- 1/4”)
•An approved fireplace hearth or hearth extension is required 6" to the front of the door. The hearth exten- sion / floor protector used must be thermal rated (k =
.84, r = 1.19). See Floor Protection, page 5.
♦Fuel delivery and burn times will vary depending on size and type of fuel used. Estimated heat in-
put based on fuel value of 8400 BTU per lb.
*Fuses are rated as fast blow.
PAGE 32
www.PelletKing.com