Lennox Hearth II-T C INS Small Area Paint Touch-Up, Motor Lubrication, Routine Maintenance

Models: II-T C FS II-T C INS

1 48
Download 48 pages 20.4 Kb
Page 30
Image 30

ROUTINE MAINTENANCE

SMALL AREA PAINT TOUCH-UP

The stove body is painted with a quality high- temperature stove paint. Use only Stove Paint, Part # 70K99. Do not touch-up your stove with any other paint. Using one small piece of 320 grit sand paper and lightly sand the blemish so that the edges are “feathered” or smooth to the touch between the painted and bare sur- faces. Do not let the sand paper gum up with paint, as this will cause scratches on the metal surface. If there are any scratches, use 600 grit sandpaper instead. Mask off surfaces you do not want painted. Paint lightly over the bare surface first as this will act as an undercoat. Then paint over a larger area in smooth even strokes to blend.

MOTOR LUBRICATION

Room Air Blower: The room air blower is permanently lubricated by the manufacturer. Do not apply oil to any part of the blower, doing so may cause damage.

Exhaust Blower: The exhaust blower requires lubrica- tion every 6 months or yearly, depending on use, with not more than two drops of 30 weight, SAE, nondetergent oil at the two lubrication points on blower.

PAGE 30

www.PelletKing.com

Page 30
Image 30
Lennox Hearth II-T C INS, II-T C FS operation manual Small Area Paint Touch-Up, Motor Lubrication, Routine Maintenance