Lennox Hearth II-T C FS Table Of Contents, Listing / Testing, EPA Environmental Protection Agency

TABLE OF CONTENTS
Important Warnings	2
Testing / Listing, EPA, Using this Manual	3
Planning Your Installation	4-8
Manufactured (Mobile) Home Installation	8
Installation	9-20
Care and Operation	21-25
Routine Maintenance	26-30
Specifications	31-32
Definitions	33
Wiring Diagram	34
Troubleshooting	35-37
Replacement Parts List / Diagrams	38-41
Optional Accessories	42
Safety / Listing Label	43
EPA and Colorado Compliance Label	44
Simple Operating Instructions Label	45
Installation Tips Label	46
Ownership Records	47

LISTING / TESTING

Listing: The listing laboratory is ITS (Intertek Testing Services) and the listing mark is Warnock Hersey.

Testing: In accordance with the specifications and proce- dures listed in UL 1482 / ULC S627 / CSA B366.2M / ULC S628 & ASTM E1509 for solid fuel room heater, report # 5515, 12-91and ASTM E1509 Report # 476-1244, 3-96. This appliance has been independently tested to UL, ULC and CSA standards. UL 1482 & ULC S627 states re- quirements for installations as a freestanding room heater, or hearth insert for masonry fireplaces listed to UBC 37 or ULC S628, or factory built (zero clearance) fireplaces listed to UL 127 or ULC S610.The safety-listing label is located on an inside hopper surface of the pellet stove. Please read this safety label carefully. It contains impor- tant information about installation and operation of this appliance. This appliance is tested and listed for residen- tial installation according to current national and local building codes as:

•A Freestanding Room Heater –FS

•A Insert Room Heater – INS

•A Manufactured (mobile) Home Heater – FS & INS

EPA (Environmental Protection Agency)

Status: EPA – Certified to comply with July 1990 par- ticulate emission standards.

PRODUCT IS SUBJECT TO CHANGE WITHOUT NO- TICE.

CONGRATULATIONS ON THE PURCHASE OF YOUR NEW PELLET STOVE MANUFACTURED BY LENNOX HEARTH PRODUCTS.

When you purchased your new pellet stove, you joined the ranks of thousands of concerned individuals whose answer to their home heating needs reflects their concern for aesthetics, efficiency and our envi- ronment. We extend our continued support to help you achieve the maximum benefit and enjoyment available from your new pellet stove.

It is our goal at Lennox Hearth Products to provide you, our valued customer, with an appliance that will ensure you years of trouble free warmth and pleasure.

Thank you for selecting a Lennox Hearth Products stove as the answer to your home heating needs.

Sincerely,

All of us at Lennox Hearth Products

PACKAGING LIST

The assembled pellet stove model Advantage II-T C FS and Advantage II-T C INS are packaged with an accessory pack- age, which contains the following:

One -	Installation and operation instructions manual.
One -	Warranty.
One -	EPA Label.
One -	Colorado compliance certificate
One -	Power cord.
One -	Damper hex wrench
One -	Grate scraper/tool.
One -	Wall thermostat.
One -	Roll of thermostat wire.
Two -	Leveling bolts, 3/8"-16 x 3 1/2” (Insert only)
One -	Ash pan trim cover
One -	Trivet
One -	Control board (Insert)
One -	Video tape
One -	Fireplace warning label (insert only)
One -	Damper rod assembly with tag

Surround Kit (For Advantage II-T C INS Only)

(Purchased separately, see page 42) kit is packaged with: One - Top surround panel.

One - Left surround panel.

One - Right surround panel with door.

Pedestal Kit (For Advantage II-T C FS Only)

(Included with freestanding stove) kit is packaged with: One - Pedestal assembly.

Three -Bolts, 3/8" x 1/2”. Three -Washers.

USING THIS MANUAL

Please read and carefully follow all of the instructions found in this manual. Please pay special attention to the safety instructions provided in this manual. The home-

owner’s Care and Operation Instructions included here will

assure you have many years of dependable and enjoyable service from your appliance.

PAGE 3

www.PelletKing.com