6. Flex the retaining clips as shown to remove the hard disk drive from the bracket.

Figure 39. Removing the hard disk drive from the bracket

7.To install a new hard disk drive into the bracket, flex the bracket and align pin 1 , pin 5 on the bracket with the corresponding holes in the hard disk drive.

Important: Do not touch the circuit board 3 on the bottom of the hard disk drive.

8. Connect the signal cable and the power cable to the new hard disk drive.

2 , pin

4 , and pin

Chapter 5. Installing or replacing hardware 55

Page 67
Image 67
Lenovo 3214, 2988, 2992E5U, 2982, 2993, 2996, 3393, 3395, 3306, 3224, 3202, 3187, 3185 Removing the hard disk drive from the bracket