7.At the rear of the computer, remove the three screws that secure the power supply assembly. Press the power supply clip 1 downward to release the power supply assembly and then slide the power supply assembly to the front of the computer. Lift the power supply assembly out of the computer.
Figure 50. Removing the power supply assembly
8.Ensure that the new power supply assembly is the correct replacement.
9.Install the new power supply assembly into the chassis so that the screw holes in the new power supply assembly are aligned with the corresponding holes in the rear of the chassis. Then, install the three screws to secure the new power supply assembly in place.
Note: Use only screws provided by Lenovo.
Figure 51. Installing the power supply assembly
10.Connect the new power supply assembly cables to all drives and the system board. See “Locating parts on the system board” on page 12.
