Lenovo TS140 manual as shown. Grasp the

4.If you are installing a PCI card, remove the appropriate metal slot cover. If you are replacing an old PCI card, grasp the old card that is currently installed and gently pull it out of the slot.

Notes:

a.The PCI card fits tightly into the card slot. If necessary, alternate moving each side of the card a small and equal amount until it is completely removed from the card slot.

b.If the PCI card is held in place by a retaining clip, open the card retaining clip PCI card and gently pull it out of the card slot.

1

as shown. Grasp the

Figure 36. Opening the PCI card retaining clip

Figure 37. Removing a PCI card

5.Remove the new PCI card from its static-protective package.

6.Install the new PCI card into the appropriate slot on the system board. See “Locating parts on the system board” on page 15.

Note: If you are installing a PCI Express x16 card, make sure the memory slot retaining clips are closed before you install the PCI Express x16 card.

58ThinkServer TS140 User Guide