Chapter 7. Troubleshooting and diagnostics
This chapter provides information about basic troubleshooting and diagnostic methods to help you solve problems that might occur in the server. If your server problem is not described here, see “Help and service” on page 90 for additional troubleshooting resources.
Troubleshooting procedure
Use the following information as a general procedure for diagnosing and troubleshooting problems you experience with your server:
1.Verify that the power cords and the cables for all attached devices are connected correctly and securely.
2.Verify that the server and all attached devices that require ac power are connected to properly grounded, functioning electrical outlets.
3.Verify that all installed hardware and attached devices are enabled in the BIOS settings of your server. For more information about accessing and changing the BIOS settings, see “Using the Setup Utility program” on page 21.
4.If the server is not working after you have added new software, installed a new optional device, or replaced a piece of hardware, remove or reinstall the software or device to see if the problem could be solved.
5.Turn on the server and press Esc as soon as you see the logo screen to view any diagnostic messages.
6.Download and use a diagnostic program to diagnose problems. See “Using a diagnostic program” on page 83.
7.Refer to “Basic troubleshooting tables” on page 84 and follow the instructions for the type of problem you are experiencing. If the basic troubleshooting information does not help you resolve a problem, continue with the next step.
8.Try using a previously server configuration to see if a recent change to hardware or software settings has caused a problem. Before restoring your previous configuration, capture your current configuration in case the older configuration settings do not solve the problem or have adverse effect.
9.Use an antivirus program to see if your server has been infected by a virus. If the program detects a virus, remove the virus.
10.If none of these actions solve the problem, seek technical assistance. See Chapter 8 “Getting information, help, and service” on page 89.
Using a diagnostic program
The following diagnostic programs are available for you to diagnose server problems:
•ThinkServer Diagnostic Tool
•ThinkServer System Profile Collection Tool
To use a diagnostic program, do the following:
1.Go to http://www.lenovo.com/drivers and follow the instructions on the Web page to locate a diagnostic program.
2.Download and unzip the diagnostic program package to get the diagnostic program package folder.
3.Open the diagnostic program package folder and run the QTW.exe file.
4.Select the language when prompted. Then, click Continue.
5.Read the End User License Agreement (EULA) terms carefully and click Accept to start the program.
© Copyright Lenovo 2013 | 83 |
