IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these i nstructions.
3. Heed all warnings.
4. Follow all instruc tions.
5. Do not use this apparatus near water.
6. Clean only with a dry cloth.
7. Do not block any ventilation openings.
Install in accordance with the manufac-
turer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or
another apparatus (including amplifiers)
that produces heat.
9. Do not defeat the safety purpose of the
polarized or grounding-type plug. A polar-
ized plug has two blades with one wider
than the other. A grounding-type plug has
two blades and a third grounding pr ong. The
wide blade or the third prong are provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked
on or pinched particularly at plugs, conve-
nience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories speci-
fied by the manufacturer .
12. Use only with the cart, stand, tripod,
bracket, or table specified by the manufac-
turer, or sold with the apparatus. When a
cart is used, use caution when moving the
cart/appartus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning
storms or when unused for long perio ds of
time.
14. Refer all servicing to qualified service per-
sonnel. Servicing is required when the
apparatus has been damaged in any way,
such as when a power-supply cord or plug
is damaged, liquid has been spilled or
objects have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
• Refer to the manufacturer’s operating
instructions for power requirements. Be
advised that diff erent operating voltages may
require the use of different line cord and/or
attachment plug.
• Do not install the unit in an unventilated rack,
or directly above heat-producing equipment
such as power amplifiers. Observe the maxi-
mum ambient operating temperature listed in
the product specification.
• Never attach audio power amplifier outputs
directly to any of the unit’ s connectors.
This equipment has been tested and found to
comply with the limits for a Class B digital
device, pursuant to Part 15 of FCC Rules.
These limits are designed to provide reason-
able protection against harmful interference in
a residential installation. This equipment gen-
erates, uses, and radiates radio frequency
energy and, if not installed and used in accor-
dance with the instructions, may cause harmful
interference to radio or television reception,
which can be determined by turnin g the equ ip-
ment off and on. The u ser is e ncour aged to try
to correct the interference by one or more of
the following measures:
• Re-orient or relocate the receiving antenna.
• Increase the separation between the equip-
ment and the receiver .
• Connect the equipment into an outlet on a
circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/
television technician for help.
To reduce the risk of fire or e lectric
shock, do not expose this appara-
tus to rain or moisture. Do not
place objects containing liquid,
such as vases, on this apparatus.