Getting Started Lexicon
1-10
QUICK START GUIDE
This section describes how to perform basic tasks. For more
detailed remote control instructions, see the “Remote Control
Command Matrix” on page 2-13 and/or the “PLAYBACK MODE
Descriptions” on page 4-9. See “Setup Menu” on page 3-3 for
comprehensive RT-20 setup menu information.
How to play a disc:
1. Power on the RT-20.
If playing a disc with video content, make sure that the display
device is powered on and set to the correct video input.
2. Press the remote control or front panel Open/Close button to
open the disc tray.
3. Load the disc with the label side facing upward.
4. Press the remote control PLAY button.
How to display a JPEG file:
1. Load a disc that contains JPEG files.
The JPEG file menu will appear on the right side of the screen.
(Some discs may start playback automatically).
2. Use the remote control and buttons to select the desired
JPEG file.
3. Press the remote control ENTER button to begin playback of
the file.
How to access a JPEG folder:
1. While a JPEG file is in playback, press the STOP button, and the
JPEG folder menu will appear on the right side of the screen.
2. Use the remote control and buttons to select the desired
JPEG folder.
3. Press ENTER.
4. Use the remote control and buttons to select a JPEG file.
5. Press ENTER to begin playback of the JPEG file.
How to play a MP3 file:
1. Load a disc that contains MP3 files.
When the disc is loaded, the MP3 tracks will appear on the
right side of the screen.
2. Use the and buttons to select the desired MP3 file.
3. Press the remote control ENTER button to begin playback of
the desired file.
When the first file is playing, the song file menu will appear on
the right side of the on-screen display.
How to access all RT-20 SETUP menus:
1. Load a disc.
2. Press the remote control SETUP button.