RT-20 Universal Disc Player Basic Operation
2-3
When the RT-20 is powered off, standby mode is automatically
deactivated, although the Standby LED remains lit for a few sec-
onds after the RT-20 is powered off. When the RT-20 is powered
on, standby mode is also deactivated, even if standby mode was
activated when the RT-20 was powered off. The front panel On/Off
button cannot be used to activate standby mode.
Note:
Power is still supplied to the RT-20 when standby mode is activated.

2 DISC DRAWER & OPEN/CLOSE BUTTON

Loads and unloads the inserted disc. When the disc drawer is
closed, pressing the Open/Close button opens the disc drawer.
When the disc drawer is open, pressing the Open/Close button
closes the disc drawer. The disc drawer can also be closed with a
gentle press against the front of the disc drawer.
When the disc drawer is first closed, the RT-20 attempts to load a
disc, even if the disc drawer is empty.

3 HDMI/DVI INDICATOR

When the RT-20 is connected (through the HDMI connector) to an
HDMI compatible display device, the LED lights green. When con-
nected to a DVI compatible display device, the LED lights red.

4 PLAY BUTTON

Activates playback of the loaded disc at regular playback speed.
When pause or resume mode is activated, pressing the Play or
Pause button activates playback at the current playback time.
When stop mode is activated, pressing the Play button activates
playback from the beginning of the loaded disc. When the disc
drawer is open, pressing the Play button closes the disc drawer and
activates playback from the beginning of the loaded disc.

5 PAUSE BUTTON

Activates pause mode, which pauses playback of the loaded disc at
the current playback time. When playback is activated, pressing the
Pause button activates pause mode at the current playback time. In
some cases, a still frame image appears on the associated display
device screen. When pause mode is activated, pressing the Pause or
Play button activates playback at the current playback time. The
Pause button has no effect when resume or stop mode is active.

6 STOP BUTTON

Activates resume mode or stop mode. Resume mode stops play-
back of the loaded disc and marks the current playback time. Stop
mode stops playback of the loaded disc.
When resume mode is deactivated (when the PLAY button is
pressed), the RT-20 resumes playing the disk from the marked time
of playback. When stop mode is deactivated, the RT-20 starts play-
ing the disc from the beginning. See the “Playback Modes Table”
on page 4-10.

7 ON/OFF BUTTON

Connects AC power to the RT-20. When the RT-20 is powered off,
pressing the On/Off button powers the RT-20 on. When the RT-20
is powered on, pressing the On/Off button powers the RT-20 off
and automatically deactivates standby mode. The On/Off button
does not activate standby mode.