Setup Lexicon
3-28
PURE MODE
Opens the Pure Mode selection screen. Pure mode allows the SACD
Audio source to maintain its purity as it bypasses the video circuitry
and is D/A converted at the high resolution of 24-bit/192-kHz sam-
pling.
To activate Pure Mode:
1. Use the remote control or button to highlight Pure Mode.
2. Press the remote control or ENTER button.
3. Use the and buttons to select Mode1 or Mode2.
The default setting is Off.
4. Press the button or the ENTER button to open the Pure
Mode:Mode1 or Pure Mode: Mode2 screen.
If you play a CD or SACD while Pure Mode: Mode1 is selected, then
Display, Video Out, and Digital Out are automatically disabled.
If you play a CD or SACD while Pure Mode: Mode2 is selected,
Video Out and DIgital Out are automatically disabled. Display is
defaulted to ON.
If you press the RT-20 front panel DISPLAY OFF button or the
remote control DIMMER button while Pure Mode is selected, the
front panel display will light for three seconds. Display and Video
Out are on, and Digital Out is off during Stop.
Select the item to set to OFF when you play a CD or SACD.
The Pure Mode: Mode1 default settings sets Display, Video Out and
Digital Out to Off. The Pure Mode: Mode2 default setting sets
Video Out and Digital Out to Off, and Display is defaulted to ON.