Lexicon RT-20 manual Introduction

Introduction Lexicon

WARNING

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

•Do not remove the cover from the unit.

•Do not insert anything into the unit through the ventila- tion holes.

•Do not handle the mains lead with wet hands.

•Make a space of about .33ft (0.1m) around the unit.

CLASS 1 LASER PRODUCT

KLASSE 1 LASER PRODUKT

LUOKAN 1 LASER LAITE

KLASS 1 LASER APPARAT PRODUCTO LASER CLASE 1

Slots and openings on the case are provided for ventilation. WARNING To ensure reliable operation of the unit, to protect it from

overheating, and to prevent fire hazard, these openings must not be blocked or covered with items such as newspapers, table cloths, or curtains. In addition, do not place the unit on a thick carpet, bed, sofa, or fabric with a thick pile.

WARNING	Before plugging in the unit for the first time, read the following
	carefully: the available power supply voltage differs among
	countries and regions. Make sure the power supply voltage
	of the area where this unit will be used meets the required
	voltage (e.g., 230V or 120V) written on the rear panel.
	Do not place naked flame sources, such as lit candles, on the
WARNING
	unit. Naked flame sources might accidentally fall down,
	causing fire to spread over the unit.

CAUTION! Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radia- tion exposure.

Note:

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

FOR CANADIAN MODEL:

This Class B digital apparatus complies with Canadian ICES-003.

POUR LE MODELE CANADIEN:

Cet appareil numérique de la Classe B est conforme à la norme NMB-003 due Canada.

ATTENTION:

POUR ÉVITER LES CHOCS ÉLECTRIQUES INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON-DANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.

ii