Lexmark W850DN Understanding printer menus, Menu item, Description, Run Initial setup, Alarms

Understanding printer menus		103
	Menu item	Description
	Run Initial setup	Instructs the printer to run the setup wizard
	Yes	Notes:
	No
		• Yes is the factory default setting.
		• After completing the setup wizard by selecting Done at the
		Country select screen, the default becomes No.
	Paper Sizes	Specifies the printer factory default measurements. The default is
	US	determined by the country/region selection in the initial setup
	Metric	wizard.
		Note: Changing this setting also changes the Units of
		Measurement setting in the Universal Setup menu and the
		default for each input source in the Paper Size/Paper Type menu.
	Alarms	Sets an alarm to sound when the printer requires operator
	Alarm Control	intervention
	Cartridge Alarm	Available selections for each alarm type are:
	Staple Alarm	Single
	Hole Punch Alarm	Off
		Continuous
		Notes:
		• Single is the factory default setting for Alarm Control. Single
		sounds three quick beeps.
		• Off is the factory default setting for Cartridge Alarm and
		Staple Alarm. Off means no alarm will sound.
		• Continuous repeats three beeps every 10 seconds.
		• The Staple Alarm is available only when the finisher is
		installed.
		• The Hole Punch Alarm is displayed only when a finisher with
		hole punch is installed.
	Timeouts	Sets the amount of time the printer waits for user intervention
	Job Hold Timeout	before it holds jobs that require unavailable resources and
	5–255 sec	continues to print other jobs in the print queue
		Notes:
		• 30 seconds is the factory default setting.
		• This menu item appears only when a printer hard disk is
		installed.