Lexmark W850DN Understanding printer menus, Menu item, Description, Separator Source, Orientation

Understanding printer menus		109
	Menu item	Description
	Separator Source	Specifies the paper source for separator sheets
	Tray <x>	Notes:
	Manual Feeder
		• Tray 1 (standard tray) is the factory default setting.
		• From the Paper menu, Configure MP must be set to Cassette in order for
		Multi‑Purpose Feeder to appear as a menu setting.
	N‑up (pages‑side)	Specifies that multiple‑page images be printed on one side of a sheet of paper
	Off	Notes:
	2‑Up
		• Off is the factory default setting.
	3‑Up
		• The number selected is the number of page images that will print per side.
	4‑Up
	6‑Up
	9‑Up
	12‑Up
	16‑Up
	N‑up Ordering	Specifies the positioning of multiple‑page images when using N‑up (pages‑sides)
	Horizontal	Notes:
	Reverse Horizontal
		• Horizontal is the factory default setting.
	Reverse Vertical
		• Positioning depends on the number of images and whether the images are in
	Vertical
		portrait or landscape orientation.
	Orientation	Specifies the orientation of a multiple‑page sheet
	Auto	Note: Auto is the factory default setting. The printer chooses between portrait and
	Landscape	landscape.
	Portrait
	N‑up Border	Prints a border around each page image when using N‑up (pages‑sides)
	None	Note: None is the factory default setting.
	Solid
	Staple Job	Specifies whether print jobs are stapled
	Off	Notes:
	Auto
		• Off is the factory default setting. Print jobs are not stapled.
	Front
		• Envelopes are not stapled.
	Back
	Dual
	Hole Punch	Specifies whether a hole punch is applied to print jobs
	Off	Notes:

On

•This menu item is available only when a finisher with Hole Punch is installed.

•Off is the factory default setting. A hole punch is not applied to print jobs.