Lexmark W850DN, 110, 19Z0301 manual Insert the hole punch box, Load input src with Custom Type Name

Troubleshooting 142

Insert the hole punch box

Insert the hole punch box into the finisher. Wait for the message to clear.

Note: To learn how to insert the hole punch box, press the up or down arrow button until Show Me appears, and

then press .

Load <input src> with <Custom Type Name>

Try one or more of the following:

•Load the specified paper into the specified source to clear the message and continue printing.

•Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .

Load <input src> with <Custom String>

Try one or more of the following:

•Load the specified paper into the specified source to clear the message and continue printing.

•Cancel the print job. Press the up or down arrow button until Cancel job appears, then press .

Load <input src> with <size>

Try one or more of the following:

•Load the specified paper into the specified source to clear the message and continue printing.

•Cancel the print job. Press the up or down arrow button until Cancel job appears, then press .

Load <input src> with <type> <size>

Try one or more of the following:

•Load the specified paper into the specified source to clear the message and continue printing.

•Cancel the print job. Press the up or down arrow button until Cancel job appears, and then press .

Load Manual Feeder with <Custom Type Name>

Try one or more of the following:

•Load the multipurpose feeder with the correct paper type and size.

If the printer finds a tray that has paper of the correct type, it uses the paper from that tray. If the printer cannot find a tray with the correct paper type, it prints on the paper that is loaded in the default paper source.

•Press the up or down arrow button until Cancel job appears, and then press to cancel the print job.