Lexmark 110, W850DN, 19Z0301 manual Bin Setup menu, Menu item, Description, Menu Item

Understanding printer menus 87

Menu item	Description
Units of Measure	Identifies the units of measure
Inches	Notes:
Millimeters
	• Inches is the US factory default setting.
	• Millimeters is the international factory default setting.
Portrait Width	Sets the portrait width
3–17 inches	Notes:
76–432 mm
	• If the width exceeds the maximum, the printer uses the maximum
	width allowed.
	• 11.69 inches is the US factory default setting. Inches can be
	increased in 0.01‑inch increments.
	• 297 mm is the international factory default setting. Millimeters can
	be increased in 1‑mm increments.
Portrait Height	Sets the portrait height
3–17 inches	Notes:
76–432 mm
	• If the height exceeds the maximum, the printer uses the maximum
	height allowed.
	• 17 inches is the US factory default setting. Inches can be increased in
	0.01‑inch increments.
	• 432 mm is the international factory default setting. Millimeters can
	be increased in 1‑mm increments.
Feed Direction	Specifies the feed direction if the paper can be loaded in either direction
Short Edge	Notes:

Long Edge

•Short Edge is the factory default setting.

•Long Edge appears only if the longest edge is shorter than the maximum width supported in the tray.

Bin Setup menu

Menu Item

Output Bin

Standard Bin

Bin <x>

Description

Specifies the default output bin

Note: Standard Bin is the factory default setting.