Lexmark 19Z0301, 110, W850DN manual Understanding printer menus 104, Print Recovery

Understanding printer menus		104
	Menu item	Description
	Timeouts	Sets the amount of time the printer waits after a job is printed
	Power Saver	before it goes into a reduced power state
	1–240 min	Notes:
		• 30 minutes is the factory default setting.
		• Lower settings conserve more energy, but may require
		longer warm‑up times.
		• Select the lowest setting if the printer shares an electrical
		circuit with room lighting or you notice lights flickering in the
		room.
		• Select a high setting if the printer is in constant use. Under
		most circumstances, this keeps the printer ready to print
		with minimum warm‑up time.
	Timeouts	Sets the amount of time in seconds the printer waits before
	Screen Timeout	returning the printer display to a Ready state
	15–300 sec	Note: 30 seconds is the factory default setting.
	Timeouts	Sets the amount of time in seconds the printer waits to receive an
	Print Timeout	end‑of‑job message before canceling the remainder of the print job
	Disabled	Notes:
	1–255 sec	• 90 seconds is the factory default setting.
		• When the timer expires, any partially printed page still in the
		printer is printed, and then the printer checks to see if any
		new print jobs are waiting.
		• Print Timeout is available only when using PCL emulation.
		This setting has no effect on PostScript emulation print jobs.
	Timeouts	Sets the amount of time in seconds the printer waits for additional
	Wait Timeout	data before canceling a print job
	Disabled	Notes:
	15–65535 sec	• 40 seconds is the factory default setting.
		• Wait Timeout is available only when the printer is using
		PostScript emulation. This setting has no effect on PCL or
		PPDS emulation print jobs.
	Print Recovery	Lets the printer automatically continue printing from certain offline
	Auto Continue	situations when not resolved within the specified time period
	Disabled	Note: Disabled is the factory default setting.
	5–255 sec
	Print Recovery	Specifies whether the printer reprints jammed pages
	Auto	Notes:
	Jam Recovery
		• Auto is the factory default setting. The printer reprints
		jammed pages unless the memory required to hold the
		pages is needed for other printer tasks.
		• On sets the printer to always reprint jammed pages.
		• Off sets the printer to never reprint jammed pages.