Lexmark 19Z0301, 110 Change input src to type size load orientation, Check input src guides

Troubleshooting 140

Change <input src> to <type> <size>

You can change the current paper source for the remainder of the print job. The formatted page will print on the paper loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:

•To select the paper tray with the correct paper size or type, press the up or down arrow button until Paper

Changed, Continue appears, and then press .

•To ignore the message and print from the tray selected for the print job, press the up or down arrow button until

Use Current <Src> appears, and then press .

•To cancel the current print job, press the up or down arrow button until Cancel job appears, and then press

.

•For more information, press the up or down arrow button until Show me or Tell me more appears, and

then press .

Change <input src> to <type> <size> load <orientation>

You can change the current paper source for the remainder of the print job. The formatted page will print on the paper loaded in the selected tray. This may cause clipping of text or images. Try one or more of the following:

•To select the paper tray with the correct paper size or type, press the up or down arrow button until Paper

Changed, Continue appears, and then press .

•To ignore the message and print from the tray selected for the print job, press the up or down arrow button until

Use Current <Src> appears, and then press .

•To cancel the current print job, press the up or down arrow button until Cancel job appears, and then press

.

•For more information, press the up or down arrow button until Show me or Tell me more appears, and

then press .

Check <input src> guides

The <input src> refers to the multipurpose feeder. The printer cannot determine the size of the paper.

Try one or more of the following:

•Readjust the paper guides.

Note: To learn how to adjust the paper guides, press the up or down arrow button until Show Me appears, and

then press .

•Check the tray configuration.

Check <input src> orientation or guides

The printer does not know the actual paper size that is loaded in a tray due to an incorrect paper orientation setting, or because tray guides are not in the proper location.