Lexmark W850DN, 110, 19Z0301 manual Network Reports menu, Menu item, Description

Understanding printer menus		91
	Menu item	Description
	Job Buffering	Temporarily stores jobs on the printer hard disk before printing. This menu appears
	Off	only if a formatted disk is installed.
	On	Notes:
	Auto	• Off is the factory default setting.
		• The On value buffers jobs on the printer hard disk. This menu selection
		appears only when a formatted disk is installed and is not defective.
		• The Auto setting buffers print jobs only if the printer is busy processing data
		from another input port.
		• Changing this setting from the printer control panel and then exiting the
		menus causes the printer to restart. The menu selection is updated.
	Mac Binary PS	Sets the printer to process Macintosh binary PostScript print jobs
	Auto	Notes:
	On
		• Auto is the factory default setting.
	Off
		• The Off setting filters print jobs using the standard protocol.
		• The On setting processes raw binary PostScript print jobs.
	Std Network Setup	Sets printer settings on jobs sent through a network port
	Network Card	Note: The Wireless menu appears only when the printer is connected to a wireless
	TCP/IP	network.
	IPv6
	AppleTalk
	NetWare
	LexLink
	Net <x> Setup
	Reports or Network Reports
	Network Card
	TCP/IP
	IPv6
	Wireless
	AppleTalk
	NetWare
	LexLink

Network Reports menu

This menu is available from the Network/Ports menu:

Network/Ports > Standard Network or Network <x> > Std Network Setup or Net <x> Setup > Reports or Network

Reports