Lexmark 19Z0301, 110, W850DN manual Quality menu, Menu item, Description

Understanding printer menus		110
	Menu item		Description
	Hole Punch Mode		Specifies the number of hole punches in print jobs
	2, 3		Notes:
	2, 4
			• This menu item is available only when a finisher with Hole Punch is installed.
			• The values of 2 and 3 are displayed only when the 3 Hole Finisher, that can
			also be used for 2 holes, is installed.
			• The 3 hole finisher allows the user to select 2 or 3 hole punch.
			• The 4 hole finisher allows the user to select 2 or 4 hole punch.
	Offset Pages		Stacks copies or print jobs into staggered sets in an output bin
	None		Notes:
	Between Copies
			• None is the factory default setting. No pages are offset during the print job.
	Between Jobs
			• Between Copies offsets each copy of a print job.
			• Between Jobs offsets each print job.
Quality menu
	Menu item	Description
	Print Resolution	Specifies the printed output resolution
	300 dpi	Note: 600 dpi is the factory default setting. The printer driver default is 1200 IQ.
	600 dpi
	1200 dpi
	1200 Image Q
	2400 Image Q
	Pixel Boost	Enhances the printed quality of small fonts and graphics
	Off	Notes:
	Fonts
		• Off is the factory default setting.
	Horizontally
		• Fonts applies this setting only to text.
	Vertically
	Both Directions	• Horizontally darkens horizontal lines of text and images.
		• Vertically darkens vertical lines of text and images.
		• Both Directions darkens horizontal and vertical lines on text and images.
	Toner Darkness	Lightens or darkens the printed output
	1–10	Notes:
		• 8 is the factory default setting.
		• Selecting a smaller number can help conserve toner.