Manuals / Lexmark / Computer Equipment / Printer

Lexmark 510 setup guide Tighten thumbscrew Bracket

Models: 510

1 66

Download 66 pages 31.93 Kb

Page 19

Tighten thumbscrew

Bracket

3 Align the other bracket with the hole on the left side of the printer as shown. Press the bracket flat against the printer, and then tighten the thumbscrew.

4 Starting at the front of the printer, push the left side cover onto the printer, fitting each slot on the cover over its corresponding tab on the optional drawer, to cover the gap between the printer and the optional drawer.

Note the side cover orientation. The side cover is flat on the bottom.

Prepare the printer

14

Image 19

Lexmark 510 setup guide Tighten thumbscrew Bracket

Contents

C510 Edition December Contents Load paper Using the publications CD Introduction IntroductionAbout the printer Base Model and OptionsPublications CD Information pages Other sources of informationQuick Reference sheet Drivers CD Lexmark Web site Unpack the printer Getting ready for setupUnpack the printer Setup Guide with a publications CD and Quick Reference sheet Installing toner cartridges Install printer suppliesInstall printer supplies Install printer supplies Close the front door Installing the photodeveloper cartridge Install printer supplies Position the optional drawer Position the optional drawerPositioning the printer Prepare the printerPrepare the printer Securing the drawer to the printer Tighten thumbscrew Bracket Attaching an operator panel overlay Adjusting tray 2 margins Set up the optional duplex unit Set up the optional Duplex unitAttaching the optional duplex unit Redrive Set up the optional duplex unit Set up the optional duplex unit Adjusting duplex margins Install memory, firmware, or option cards Install memory, firmware, or option cardsRemoving the system board Installing printer memory Installing an optional flash memory or firmware card Cards Reinstalling the system board Load paper Load paperLoading the trays Load paper Load paper Attaching a local cable Attach cablesAttach cables Parallel Ethernet Attaching a network cableWhat do I do next? Turning your printer onInstall drivers for local printing Install drivers for local printing\drivers\win2000\ WindowsSelect Search for a suitable driver, and then click Next Using Windows 98 with USB or parallel cable Page Macintosh 8.6-9.0 Open Apple LaserWriter MacintoshUNIX/Linux Install drivers for local printing Printing a menu settings Verify printer setupVerify printer setup Printing Quick Reference information Printing a network setupClick Quick Reference Verify printer setup Configure for TCP/IP Configure for TCP/IPAssigning a printer IP address Run IP settingsConfiguring for Pull Printing VerifyingSupported network printer ports Install drivers for network printingInstall drivers for network printing Supported printer driversPrinting configuration Operating system Go to Click Install Printer and SoftwareSharing Settings PrintersShared Name text box Using the point and print method Install the printer driver or subset on network clientsClick Start Settings Printers Using the peer-to-peer methodClick Network Print Server Mac OS Choose Printing Change SetupClick Applications Utilities Print Center Click Add Printer Click Mac OS X EnglishClick Applications TextEdit NetWare Viewing the CD contents Using the publicationsUsing the publications CD Lexmark International, Inc., Lexington, KY Statement of Limited WarrantyWarranty Warranty serviceLimitation of liability Extent of warrantyAdditional rights 20K1030 K0125