Installing an optional flash memory or firmware card | Lexmark 510

Latch

Notch

4 Push the memory card straight into the connector until it snaps into place. Make sure each latch fits over the notch located on either side of the memory card.

Installing an optional flash memory or firmware card

Note: Firmware cards offered for other Lexmark printers cannot be used with your printer.

Warning: Firmware cards are easily damaged by static electricity. Touch something metal on the printer before you touch a card.

Plastic pins

Metal pins

Follow the instructions in this section to install flash memory or a firmware card. The system board has two connection locations where you can install a total of one flash memory card and one firmware card.

1 Unpack the flash memory or firmware card.

Avoid touching the metal pins on the bottom of the card. Save the packaging.

Install memory, firmware, or option cards

25

Image 30

Lexmark 510 setup guide Installing an optional flash memory or firmware card

Contents

C510 Edition December Contents Load paper Using the publications CD Base Model and Options IntroductionAbout the printer Introduction Other sources of information Publications CD Information pages Quick Reference sheet Drivers CD Lexmark Web site Getting ready for setup Unpack the printerUnpack the printer Setup Guide with a publications CD and Quick Reference sheet Install printer supplies Installing toner cartridgesInstall printer supplies Install printer supplies Close the front door Installing the photodeveloper cartridge Install printer supplies Position the optional drawer Position the optional drawer Prepare the printer Positioning the printerPrepare the printer Securing the drawer to the printer Tighten thumbscrew Bracket Attaching an operator panel overlay Adjusting tray 2 margins Set up the optional Duplex unit Set up the optional duplex unitAttaching the optional duplex unit Redrive Set up the optional duplex unit Set up the optional duplex unit Adjusting duplex margins Install memory, firmware, or option cards Install memory, firmware, or option cards Removing the system board Installing printer memory Installing an optional flash memory or firmware card Cards Reinstalling the system board Load paper Load paper Loading the trays Load paper Load paper Attach cables Attaching a local cableAttach cables Parallel Attaching a network cable Ethernet Turning your printer on What do I do next? Install drivers for local printing Install drivers for local printing Windows \drivers\win2000\ Select Search for a suitable driver, and then click Next Using Windows 98 with USB or parallel cable Page Macintosh Macintosh 8.6-9.0 Open Apple LaserWriter UNIX/Linux Install drivers for local printing Verify printer setup Printing a menu settingsVerify printer setup Printing a network setup Printing Quick Reference informationClick Quick Reference Verify printer setup Configure for TCP/IP Configure for TCP/IPAssigning a printer IP address Verifying IP settingsConfiguring for Pull Printing Run Supported printer drivers Install drivers for network printingInstall drivers for network printing Supported network printer ports Click Install Printer and Software Printing configuration Operating system Go to Settings Printers SharingShared Name text box Install the printer driver or subset on network clients Using the point and print method Using the peer-to-peer method Click Start Settings PrintersClick Network Print Server Choose Printing Change Setup Mac OS Click Mac OS X English Click Applications Utilities Print Center Click Add PrinterClick Applications TextEdit NetWare Using the publications Viewing the CD contents Using the publications CD Warranty service Statement of Limited WarrantyWarranty Lexmark International, Inc., Lexington, KY Extent of warranty Limitation of liabilityAdditional rights 20K1030 K0125