Using Windows 2000 with USB or parallel cable
Note: You need administrative access to install printer drivers on your computer.
Using Windows Me with USB or parallel cable
Note: Depending on the software and printers already installed on your computer, your screens may vary from those in the instructions.
When the Found New Hardware Wizard screen appears:
1 Insert the drivers CD. If the CD auto launches, exit the CD. Click Next.
2 Select Search for a suitable driver, and then click Next.
3 Select only Specify a location, and then click Next.
4 Browse to the location of the printer driver on the drivers CD:
D:\Drivers\Win_2000\
5 Click Open, and then click OK.
6 Click Next to install the driver that is displayed.
If a message appears regarding the driver not being digitally signed, it is okay to disregard this message.
7 Click Finish when the software is installed.
8 Print a test page to verify printer setup.
You must install both a USB port driver and an enhanced custom print driver.
When the Found New Hardware Wizard screen appears:
1 Insert the drivers CD. If the CD auto launches, exit the CD. Click Next.
2 Select Automatic search for the best driver (recommended), and then click Next. The wizard searches for a USB port driver. The name of it will be similar to your printer name.
3 After the USB port driver is found, click Finish.
4 Select Automatic search for the best driver (recommended), and then click Next. The wizard now searches for a printer driver.
5 Select your printer and driver from the list, and then click OK. Make sure you select the driver in the correct language you want to use.
D:\Drivers\WIN_9X\<LANGUAGE>
6 After the printer driver is installed, click Finish.
Install drivers for local printing
38
