Securing the drawer to the printer | If you have an optional drawer, secure it |
| to the printer. |
| 1 Align one bracket with the hole on |
| the right side of the printer as |
| shown. Press the bracket flat |
| against the printer, and then |
| tighten the thumbscrew. |
Bracket
Tighten thumbscrew
2 Starting at the front of the printer, push the right side cover onto the printer, fitting each slot on the cover over its corresponding tab on the optional drawer, to cover the gap between the printer and the optional drawer.
Note the side cover orientation. The side cover is flat on the bottom.
Prepare the printer
13
