Lexmark 510 manual

CAUTION: The printer weighs 30.4 kg (67 lb), and requires at least two people to lift it safely.

Remove all items from the box. Make sure you have the following items:

250-sheet tray

Drivers CD

Power cord

Setup Guide with publications CD and Quick Reference sheet

Operator panel overlay (non-English only)

Photodeveloper cartridge

•Printer with one 250-sheet tray

•Power cord

•Photodeveloper cartridge

•Print cartridges (four, shipped inside printer, wrapped in packaging)

•Setup Guide with a publications CD and Quick Reference sheet

•Drivers CD

•Operator panel overlay (non-English only)

If any items are missing or damaged, refer to our Lexmark Web site at www.lexmark.com for the designated Lexmark support phone number for your country.

Remove any tape and packing material from the printer. Save the carton and packing material in case you need to repack the printer.

Note: To avoid overexposing the photodeveloper cartridge, leave it in its packaging until you are ready to install it.

Unpack the printer

5

Image 10

Lexmark 510 setup guide Setup Guide with a publications CD and Quick Reference sheet

Contents

C510 Edition December Contents Load paper Using the publications CD Base Model and Options IntroductionAbout the printer Introduction Other sources of information Publications CD Information pages Quick Reference sheet Drivers CD Lexmark Web site Unpack the printer Getting ready for setupUnpack the printer Setup Guide with a publications CD and Quick Reference sheet Installing toner cartridges Install printer suppliesInstall printer supplies Install printer supplies Close the front door Installing the photodeveloper cartridge Install printer supplies Position the optional drawer Position the optional drawer Positioning the printer Prepare the printerPrepare the printer Securing the drawer to the printer Tighten thumbscrew Bracket Attaching an operator panel overlay Adjusting tray 2 margins Set up the optional duplex unit Set up the optional Duplex unitAttaching the optional duplex unit Redrive Set up the optional duplex unit Set up the optional duplex unit Adjusting duplex margins Install memory, firmware, or option cards Install memory, firmware, or option cards Removing the system board Installing printer memory Installing an optional flash memory or firmware card Cards Reinstalling the system board Load paper Load paper Loading the trays Load paper Load paper Attaching a local cable Attach cablesAttach cables Parallel Attaching a network cable Ethernet Turning your printer on What do I do next? Install drivers for local printing Install drivers for local printing Windows \drivers\win2000\ Select Search for a suitable driver, and then click Next Using Windows 98 with USB or parallel cable Page Macintosh Macintosh 8.6-9.0 Open Apple LaserWriter UNIX/Linux Install drivers for local printing Printing a menu settings Verify printer setupVerify printer setup Printing Quick Reference information Printing a network setupClick Quick Reference Verify printer setup Configure for TCP/IP Configure for TCP/IPAssigning a printer IP address Verifying IP settingsConfiguring for Pull Printing Run Supported printer drivers Install drivers for network printingInstall drivers for network printing Supported network printer ports Click Install Printer and Software Printing configuration Operating system Go to Sharing Settings PrintersShared Name text box Install the printer driver or subset on network clients Using the point and print method Click Start Settings Printers Using the peer-to-peer methodClick Network Print Server Choose Printing Change Setup Mac OS Click Applications Utilities Print Center Click Add Printer Click Mac OS X EnglishClick Applications TextEdit NetWare Using the publications Viewing the CD contents Using the publications CD Warranty service Statement of Limited WarrantyWarranty Lexmark International, Inc., Lexington, KY Limitation of liability Extent of warrantyAdditional rights 20K1030 K0125