Installing printer memory | Lexmark 510 guide

Installing printer memory

Memory connector 1

Memory connector 2

Note: Some memory and firmware options offered for other Lexmark printers cannot be used with your printer. Refer to the publications CD for specifications.

Notch

Ridge

Follow the instructions in this section to install printer memory.

1 Unpack the optional printer memory card. Avoid touching the connection points along its edge. Save the packaging materials.

2 Open both latches on the

connector completely.

3 Align the notches on the memory card with the ridges on the connector.

Install memory, firmware, or option cards

24

Image 29

Lexmark 510 setup guide Installing printer memory

Contents

C510 Edition December Contents Load paper Using the publications CD About the printer IntroductionBase Model and Options Introduction Publications CD Information pages Other sources of information Quick Reference sheet Drivers CD Lexmark Web site Unpack the printer Getting ready for setupUnpack the printer Setup Guide with a publications CD and Quick Reference sheet Install printer supplies Install printer suppliesInstalling toner cartridges Install printer supplies Close the front door Installing the photodeveloper cartridge Install printer supplies Position the optional drawer Position the optional drawer Prepare the printer Prepare the printerPositioning the printer Securing the drawer to the printer Tighten thumbscrew Bracket Attaching an operator panel overlay Adjusting tray 2 margins Attaching the optional duplex unit Set up the optional Duplex unitSet up the optional duplex unit Redrive Set up the optional duplex unit Set up the optional duplex unit Adjusting duplex margins Install memory, firmware, or option cards Install memory, firmware, or option cards Removing the system board Installing printer memory Installing an optional flash memory or firmware card Cards Reinstalling the system board Load paper Load paper Loading the trays Load paper Load paper Attach cables Attach cablesAttaching a local cable Parallel Ethernet Attaching a network cable What do I do next? Turning your printer on Install drivers for local printing Install drivers for local printing \drivers\win2000\ Windows Select Search for a suitable driver, and then click Next Using Windows 98 with USB or parallel cable Page Macintosh 8.6-9.0 Open Apple LaserWriter Macintosh UNIX/Linux Install drivers for local printing Verify printer setup Verify printer setupPrinting a menu settings Click Quick Reference Printing a network setupPrinting Quick Reference information Verify printer setup Assigning a printer IP address Configure for TCP/IPConfigure for TCP/IP Configuring for Pull Printing IP settingsVerifying Run Install drivers for network printing Install drivers for network printingSupported printer drivers Supported network printer ports Printing configuration Operating system Go to Click Install Printer and Software Shared Name text box Settings PrintersSharing Using the point and print method Install the printer driver or subset on network clients Click Network Print Server Using the peer-to-peer methodClick Start Settings Printers Mac OS Choose Printing Change Setup Click Applications TextEdit Click Mac OS X EnglishClick Applications Utilities Print Center Click Add Printer NetWare Viewing the CD contents Using the publications Using the publications CD Warranty Statement of Limited WarrantyWarranty service Lexmark International, Inc., Lexington, KY Additional rights Extent of warrantyLimitation of liability 20K1030 K0125