Liebert 50 & 60Hz, 8 Tons 1.3.1Single Point Power Kit, 1.3.2Refrigerant Line Sweat Adapter Kits

Product Features

1.3Ancillary (Ship Loose Accessories)

1.3.1Single Point Power Kit

A Single Point Power Kit allows the connection of a system (Evaporator and indoor condensing unit) to a single power source when the units are close coupled. The kit includes a junction box with power distribution, sub-fusing, and evaporator and condenser wiring.

1.3.2Refrigerant Line Sweat Adapter Kits

This kit includes the compatible fittings required (four suction and four liquid line connections) when using field supplied interconnecting refrigerant piping.

1.3.3Return Air Filter Box with Duct Collar Kit

A return air filter box with duct flange, 4" (102 mm) filter, and a supply air duct flange are provided for ducting the evaporator air.

1.3.4Condensate Pump Kit

A condensate pump is required when the evaporator is installed below the level of the gravity-fed drain line. Components include: the pump; check valve; sump; level sensor; float switch; and controls. Refer to detailed instructions and drawings supplied with the pump.

1.3.5Remote Monitoring and Control

Liebert can provide a variety of remote monitoring and control devices to enhance your Mini-Mate2 system. These include water detection, remote monitoring of a single unit, and remote control/moni- toring of multiple units.

1.3.6Remote Sensors

Remote temperature/humidity sensors can be mounted in the controlled space or in duct work and includes 30 feet of control cable.

3