OPERATION
3.PROGRAM LIST: The PROGRAM LIST block in the center of this overlay provides a convenient place to record a brief description of each welding procedure stored in memory. A “Dry Erase” mark- er should be used for this purpose.
4.DISPLAY RECALL KEY: To view other information about the selected procedure, press the DISPLAY RECALL key. The display window will show the procedure description and gas type of the se- lected procedure for as long as the key is held depressed. When the key is released, material type, wire size, and process descriptions will be displayed for a few seconds.
5.HIGH TEMPERATURE LIGHT: The high tempera- ture light comes on when the internal machine temperature exceeds the allowed limit. Output is disabled until the machine cools down and the high temperature light goes out.
6.MEMORY LIGHTS: A memory light is on when its corresponding memory is selected. This tells you what memory is active at any given time.
7.TOUCH SENSE LED: This light comes on during the touch sensing sequence when a touch sensing robot controller is used
