OPERATION | ||
|
|
|
PRODUCT DESCRIPTION
General Physical Description
The Power Feed™ 10M Single Wire Feeder is a mod- ular wire feeder, consisting of two components - a wire drive and a control box - are available assem- bled as a bench unit or as a boom system. High speed, highly reliable digital cables connect the com- ponents together and to the Power Wave power source.
The Power Feed™ 10M Single Wire Feeder system has the ability to connect multiple wire feeders to one power source, use the same power source to weld in two different locations (not simultaneously), or load a different electrode on each feeder to eliminate change over time.
The powerful four roll wire drive system sets the industry standard for ease of use. Its patented design allows for
General Functional Description
•The Power Feed™ 10M Single Wire Feeder is a highly versatile wire feeder with easy to use fea- tures that make it easy for the operator to adjust the arc for specific preferences.
•The new MSP4 panel clearly displays key welding information. Use the MSP4 panel to quickly adjust weld settings, arc starting parameters, arc end para- meters and
•The Power Feed™ 10M Single Wire Feeder wire feeder is provided with an infrared red (IR) port. Transferring welding settings from one wire feeder to another is accomplished with a common palm computer.
•When the Power Feed™ 10M Single Wire Feeder is coupled to a Power Wave welding power source, the result is a welding system with absolutely supe- rior arc performance.
RECOMMENDED PROCESSES
The Power Feed™ 10M Single Wire Feeder is well suited for all MIG welding processes, giving premium arc performance especially with unusual alloys and out of position work.
• GMAW | • SMAW |
• | • GTAW (Touch Start TIG only) |
• | • CAG |
• FCAW |
|
PROCESS LIMITATIONS
The Power Feed™ 10M Single Wire Feeder is not suitable for:
•SAW
•GTAW with HF
Not all weld modes or processes described in this manual are avail- able on all Power Wave power sources.
REQUIRED EQUIPMENT
Lincoln’s Power Feed™ 10M Single Wire Feeder is designed for use with the Power Wave family of power sources. These include:
•Power Wave 355 • Power Wave 455M CE
•Power Wave 455 • Power Wave 455M STT
•Power Feed 455/STT • Power Wave 455M STT CE
• Power Wave 455M • Power Wave 655
ADDITIONAL REQUIRED EQUIPMENT
•Drive Roll Kits
•Control Cables
•Gun and Cable Assembly
•Weld Wire
•Shielding gas
•Work Cable and Clamp
EQUIPMENT LIMITATIONS
•The Power Feed™ 10M Single Wire Feeder does not operate with the Power Wave 450.
•The Power Feed™ 10M Single Wire Feeder does not operate with any analog based power sources
•The Memory Panel is required to set procedure limits.
•The Boom model does not support
•A
•Spool guns do not operate with the Power Feed 10M.
