C-11

C-11

ACCESSORIES

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

CONNECTION OF THE K488 SG CON- TROL MODULE AND K487 MAGNUM SPOOL GUN TO THE RANGER 9 (SEE FIGURE C.8.)

1.Shut the welder off.

2.Connect the electrode cable from the SG Control Module to the “ELECTRODE” terminal of the welder. Connect the work cable to the “TO WORK” terminal of the welder.

NOTE: Welding cable must be sized for current and duty cycle of application.

3.Connect the K691-10 Input Cable to the SG Control Module and the 14 pin amphenol of the RANGER 9 as indicated in Figure C.8.

4.Set the slide switch on the SG Control Module to the “Lincoln” position.

CAUTION

Be sure this switch is set to the “Lincoln” (contact clo- sure) position before attempting to operate the SG Control Module. Incorrect switch position could result in damage to the SG Control Module and/or the RANGER 9.

5.Set the welder “polarity” switch to the desired polarity, either DC (-) or DC (+).

6.Set the “RANGE” switch to the “WIRE FEED” posi- tion.

7.Place the “IDLER” switch in the “HIGH” position.

CAUTION

Any increase of the high idle engine RPM by changing the governor setting or overriding the throttle linkage will cause an increase in the AC auxiliary voltage. If this voltage goes over 140 volts, wire feeder control circuits may be damaged. The engine governor set- ting is preset at the factory — do not adjust above RPM specifications listed in this manual.

8.Place the WELDING TERMINALS switch in the “REMOTELY CONTROLLED” position.

9.Adjust wire feed speed at the SG Control Module and set the welding voltage with the output “CON- TROL” to a CV (constant voltage) position at the welder.

NOTE: If optional remote control is used, place the output control switch in the “CONTROL REMOTE” position.

Return to Section TOC

Return to Master TOC

FIGURE C.8

RANGER 9 AND 10LX/K691-10/K488/K487 SPOOL GUN CONNECTION DIAGRAM

115V RECEPTACLE

K488 SG

CONTROL MODULE

K487-25

SPOOL GUN

14 PIN WIRE FEEDER

6 PIN REMOTE

K691-10

RECEPTACLE

 

 

 

RECEPTACLE

INPUT CABLE

TO WORK

 

ELECTRODE

 

 

 

 

 

 

 

Return to Section TOC

Return to Master TOC

TO WORK

ELECTRODE CABLE TO CONTROL MODULE

RANGER 9

 

RANGER 9

 

 

Page 40 Page 42
Page 41
Image 41
Lincoln Electric SVM 110-A service manual 115V Receptacle
Page 40 Page 42

SVM 110-A specifications

The Lincoln Electric SVM 110-A is a state-of-the-art welding machine designed to cater to the needs of professionals and hobbyists alike. Known for its adaptability and superior performance, the SVM 110-A provides a seamless welding experience that is gaining popularity across various industries.

One of the main features of the Lincoln Electric SVM 110-A is its impressive power output. Capable of delivering up to 110 amps of welding current, this machine is ideal for a wide range of applications, including light to medium fabrication work, maintenance, and repair tasks. The versatile voltage input options allow users to operate the machine on standard household current as well as generator power, enhancing its portability and usability in diverse settings.

The SVM 110-A employs advanced inverter technology, which allows for a more compact design without sacrificing performance. This technology not only improves efficiency but also provides greater control over the welding arc, ensuring cleaner beads and reduced spatter. Additionally, the inverter design contributes to a lighter weight, making the SVM 110-A easy to transport and maneuver.

Another significant characteristic of the SVM 110-A is its user-friendly interface. With intuitive controls and clear display indicators, the machine is designed for ease of use, enabling welders to quickly adjust settings to suit their specific needs. This feature is especially beneficial for beginners who are looking to enhance their skills without being overwhelmed by complex operations.

The machine supports a variety of welding processes, including MIG and stick welding, offering unmatched versatility in terms of the types of materials it can handle. From steel to aluminum, the SVM 110-A demonstrates excellent compatibility with various consumables, allowing users to select the best options for their projects.

Furthermore, the design of the SVM 110-A incorporates advanced safety features, including thermal overload protection and a sturdy construction that can withstand demanding environments. This commitment to safety ensures that users can perform their work confidently and efficiently.

In conclusion, the Lincoln Electric SVM 110-A is a remarkable welding machine that combines power, portability, and ease of use. Its advanced inverter technology, user-friendly controls, and versatility make it an ideal choice for both amateurs and seasoned welders. Whether for home projects or professional trades, the SVM 110-A stands out as a reliable and efficient solution in today’s welding landscape.
Top Page Image Contents