Nmea | Lowrance electronic 10764001 specs

NMEA 2000

Turns on/off sharing/receiving of waypoints across a NMEA 2000 network. You can also turn on backlight sync, which allows all unit backlights to be adjusted from any display unit on the network.

NMEA 0183

Used to configure the display unit to send/receive NMEA 0183 data.

Receive waypoint

Turns on/off capability to receive waypoints across a NMEA 0183 network.

Serial ports

Configures communication ports to share data with other devices.

Output

Turns on/off NMEA 0183 data output transmissions.

Output sentences

Used to select the NMEA 0183 output sentences your unit will use when communicating with other NMEA 0183 devices. The default setting will work well with most configurations.

Ethernet

Displays the unit’s IP address on the Ethernet network.

Networking Lowrance HDS Gen2 Touch

101

Page 103

Image 103

Lowrance electronic 10764001 manual Nmea

Contents

HDS Gen2Touch Copyright 2012 Navico All Rights Reserved Declarations and conformance WarrantyPreface Copyright Software About this manual Contents StructureMap NavigatingSonar StructureScan HD Using the simulator Using Video 9 and 12 units onlyAlarm system System Settings Fuel Using AISMaintenance Networking HDS Gen2 Touchscreen and keys IntroductionLong press turns the unit ON/OFF Tap to see the full menu Tap an icon to access utility dataHDS Gen2 Touch home screen Radar First time startup Power keyUsing the touchscreen Device configuration dialog appears when you start up Slide bar MenusMenus Dropdown menu Hidden system menu Back buttonMenu Dialog boxes Settings dialogVirtual keyboard is operated by tapping the virtual keys Panning Using the cursorCursor assist mode Positioning a Man Overboard waypoint Screen capture Cancel navigationDelete a MOB waypoint Overview PagesSelecting pages, quick splits Saving Favorites Adjusting splitsSelecting Active panel Customizing pages Editing favorites Deleting favorites Data OverlayCustomizing overlay data Optional chart items ChartChart Vessel symbol Zooming Chart scaleUsing the cursor on the chart Panning the chart Measuring distance Chart menuYou can quickly create routes on the chart Creating routes North up Heading up Chart optionsFind Orientation View 2D, 3D 3D chart view optionsChart tilted in rotate mode Look ahead 2D mapping Shaded relief Chart detailPan mode Imagery This is the minimum information sufficient for navigation Displaying information about chart and chart objectsThis is all available information for the chart in use Categories Switch chart data the unit is using Chart overlayChart Settings Selecting chart data Navionics chart options Community layer Shading adds terrain information to the chartTraditional 2D chart View Photo transparency Change to LowranceNo Photo overlay Photo overlay, land only Minimum transparency Optional settings for Navionics charts Navionics settings Waypoints, route and trails screens Waypoints, routes & trailsWaypoints Edit waypoints Positioning waypointsTwice Moving a waypoint by tapping the screen Creating new route from chartWaypoint alarm settings Routes Edit a route Creating routes using existing waypointsNew route window Trails Trail settingsCreating a new trail Navigate a route Navigating on the chartNavigating Goto cursor You cancel navigation from the Navigation menu Navigation settings panelSelecting start point Trails XTE limit Cross track errorXTE alarm Cross track error Arrival radius Steer Vessel symbolData fields Sonar Using the cursor on the sonar Zoom bars Saving a waypoint Preview Viewing sonar history Tap Clear cursor to return to the normal sonar menu Sonar menuNo cursor Advanced Log sonar data Viewing recorded sonar data Recording symbol Logging messageBytes per sounding Log all channels Split ViewSensitivity Colorline Bottom lock Zoom barsFlasher Measuring distance Network sonar Sonar settingsPausing sonar Stop sonar Overlay Downscan Reset fishing modeFishing modes Keel offset Installation settings18 ft +0.0 20 ft +0.5 20.5 ft Transducer type Water temperature calibrationWater speed calibration Water speed averaging SideScan StructureScan HDFrequency Range keys Range scale Range Scale Bottom Frequency Range keys Using the cursor on the StructureScanDownScan Data overlay Viewing StructureScan history Be visible on the screen StructureScan menuRange Frequency Flipping Left/Right image Log sonarContrast Palette Stop sonar Structure settingsNetwork StructureScan Turning on StructureMap overlay StructureMapSelecting Structure Source Saved mode Live mode Transparency Structure options Noise Rejection FrequencyLogging Structure data Water column Using StructureMaps with mapping cards Accessing StructureMap files on SD cardConverting files Scanning tips Scanning Fishing areasSharing files Show StructureMap .smf files Vessel dashboard Navigation dashboard Instruments panelsDashboards Customizing the Instrument panel Tap Select info Edit an Instrument dashboard Setting up the video Using Video 9 and 12 units onlyVideo Current Threshold 11The Alarm systemAlarms dialog Set limits Multiple alarms Single alarmsType of messages Acknowledging an alarm Message listing UtilitiesVessels Status listing Find AlarmsSun/moon Trip Calculator Satellites TidesViewing screenshots Copying all files SettingsOpens the system settings menu Copying files to SD card Changing system settings System Settings Units Selecting simulator source files Using the simulatorSimulator mode Demo mode Selects the source where simulated GPS data is generated Advanced simulator settingsMoves the simulated vessel position to the cursor position Range Heading line 15Using the radar optionalRadar operation modes Orientation Using the cursor on the radar Adjusting range Measuring range and bearing to a target AdjustRadar menu Position Center Look ahead Custom offset Symbology Turns on/off onscreen EBL/VRM information box Setting a guard zone around your vesselEBL/VRM settings Defining an EBL/VRM marker Shape Radar Settings menuAlarm when Defining a guard zone Clearing target trails from the panel Radar orientationSTC curve Target trails Range markers North indicatorThreshold Fast scan Tracking Marpa targets Marpa target symbolsCancelling target tracking Your unit uses the target symbols shown below Target trails and safe rings Marpa target settingsViewing target information Defining dangerous vessels Radar overlay Vessel alarm settings Radar installation menu Returns caused by sidelobes tend to appear as arcs Restore radar to Factory Default Target symbols Using AISAIS vessels on chart Selecting single AIS targets Viewing information about AIS targetsViewing information about all AIS targets Vessel settings panel Vessel alarms Filtering the targets Your vessel’s Mmsi numberVessels extension lines Networking Auto configurationData sources Scope Configuring data sources Used to create an instance of a data source NewRemove Renaming a data source Calibrating devices DiagnosticsDevice list Sirius status US only Nmea 102 Vessel setupFuel Refuel Find fuel Fuel usedCalibration 104 19SIRIUS weather North America onlyWeather display Sirius status Rain Weather symbologyShowing detailed weather information Precipitation 106 Weather overlay transparency Weather alarmsMin transparency 108 Weather reportsMarine zone Tropical statements Animating Sirius weather graphics 110 AudioEnabling audio Audio media bar Selecting the audio source Adjusting the volumeOperating the audio source Audio controls Selecting AM/FM tuner region Using the FM/AM radioShuffle and repeat Playback menu Favorites list Using Sirius radioSaving a channel to the favorite list Channels list Mixer Locking channels114 Preventive maintenance MaintenanceSimple maintenance procedures 116 Software upgradesTroubleshooting Backing up your system data Example shows how to export waypoints, routes and trails 118 Index 119 Range 61 Selecting source 120Flasher 46 Frequency 43 History preview 42 Log sonar data Contrast Frequency 62 Logging data 121 Navico Databases License Agreement Databases Limited Warranty Page 988-10312-001