Lowrance electronic 10764001 Arrival radius, XTE limit Cross track error, Trails, Logging Type

Arrival radius

Sets an invisible circle around the destination waypoint.

The vessel is considered arrived at the waypoint when it is within this radius.

XTE limit (Cross track error)

This parameter defines the vessel’s accepted offset distance from the leg. If the vessel goes beyond this limit an alarm will be activated.

XTE alarm (Cross track error)

Turns on/off the XTE alarm.

Trails

Opens the Trails dialog where trails settings can be adjusted and trails can be converted into routes for navigation.

Create route

1.Select a trail on the Trails dialog

2.Tap Create route

--When the route has been created, the Edit routes dialog will appear.

3.Tap Start

4.Tap the way you want to navigate the route (Forward or Reverse)

Logging Type

You can select to record trail points based on time, distance or by letting the unit position a point automatically when a course change is registered.

Phantom Loran

Estimates Loran TDs based on GPS position, the selected GRI and preferred station.

Loran settings

Defines Loran chains (GRI) and preferred station for waypoint entry and cursor position. The graphic example shows cursor position window with Loran position information.

For more information refer to your Loran system documentation.

38 Navigating Lowrance HDS Gen2 Touch