E n g l i s h
Connecting to TV (cont’d)
Option 3 : Using Video (CVBS) jack
Antenna or
Satellite/Cable TV signal
1 | 2 | 4 | 3 |
|
|
5
This cable, usually featuring yellow cinch plugs, is used for transmitting the Composite Video signal (FBAS, CVBS.) In this method of transmission, the color signal and the brightness signal are transmitted on the same cable.
Have the following cables ready:
1)Antenna cable
2)AV cables (yellow/red/white)
1 Turn off your TV and remove the antenna cable from your TV (or Satellite Receiver/ Cable Box.) Insert it to the ANTENNA input jack at the back of the DVD recorder.
2Use the supplied antenna cable to connect the DVD recorder’s TV output jack to the antenna input jack at the back of your TV set.
3Use the supplied AV cables (yellow plug) to connect the DVD recorder’s VIDEO (CVBS) (OUT 2) jack to the Video In jack at the back of your TV set (or labeled as Video In,AV In or Composite.)
14
4Use the supplied AV cables (red/white plugs) to connect the DVD recorder’s AUDIO L/R (OUT 2) jack to the audio input jack at the back of your TV set (or labeled as AV In or Audio In.)
5Connect the power cable from the DVD recorder’s ~ MAINS to the power supply.
6Press
recorder to turn it on.
➜ The message 'IS THE TV ON?' appears on the display panel.
7Turn on the TV power. Select the correct Video In channel at the TV (see page 10.)
➜The first installation menu
{Language and Country } will appear on the TV.
8Proceed to page 24 to continue the first installation.
MRV660_17_Eng40 | 14 |
9/3/05, 10:24 AM
3139 246 XXXXX