Installing the DVD Recorder (cont’d)
Selecting the channel input signal
The DVD recorder will detect whether you connected an Antenna or Cable TV signal. If you are not receiving the correct channels, you can use this function to select the type of connection you are using and allow the DVD recorder to reset the channels.
1Press SYSTEM-MENU.
➜ The system menu appears on the TV.
2Press 4 repeatedly to select { Set-up .}
3Press 2 repeatedly to select { Analog Ch.}
4Press 4 repeatedly to select
{Connection } and press 2 to confirm.
5Press 3 4 to select the connection the TV is using.
➜{ Auto } : Select this to enable the
DVD recorder to detect the input signal automatically.
➜{ Cable } : Select this if you have connected a cable signal.
➜{ Antenna } : Select this if you have connected an antenna signal.
6Press OK to confirm.
➜ The TV channel search starts.
E n g l i s h
TIPS: Press 1 to go back to previous menu item. Press
27
MRV660_17_Eng40 | 27 | 9/3/05, 10:25 AM | 3139 246 XXXXX |
|
