STEP 2 (Continued)
Detect & Measure (Main)
NOTE
If “Caution!” is displayed:
Go to “Error messages” (vpage 16), check any related items, and perform the necessary procedures.
If the problem is resolved, return and restart “Audyssey® Auto Setup”.
When performing Audyssey® Auto Setup over again
Press ui to select “Retry”, and then press ENTER.
When measuring has stopped
qPress RETURN, to the “Cancel Auto Setup?” prompt is displayed. w Press o to select “Yes”, then press ENTER.
Setting up the speakers again
Repeat the operation from step 4 of STEP 1 Preparation .
STEP 3
Measure (2nd – 6th)
•In STEP 3, you will perform measurements at multiple positions (two to six positions) other than the main listening position.
•Just one position can be measured but measuring multiple positions increases the accuracy of the correction of acoustic distortion within the listening area.
10Move the setup microphone to position 2, use ui to select “Measure”, and then press
ENTER.
The measurement of the second position starts. Measurements can be made in up to six positions.
Audyssey Auto Setup | MultEQ |
Measure (2nd) Please place the microphone at ear height at 2nd listening position.
Measure
Next 
Calculate
[ENTER] Enter | [RETURN] Cancel |
If you want to omit measurements from the next position onward, select “Next 
Calculate”.
(Go to STEP4 Calculate )
Repeat step 10, measuring positions 3 to 6. | ||||||
11When measurement of position 6 is completed, a | ||||||
“Measurements finished.” message is displayed. | ||||||
|
|
|
|
|
|
|
|
| Audyssey Auto Setup |
| MultEQ |
| |
|
|
|
|
|
|
|
|
| Measure (Finish) |
|
|
| |
|
| Measurements finished. |
|
|
| |
|
| Retry |
|
|
| |
|
|
|
|
| ||
|
|
|
|
|
|
|
|
| Next Calculate |
|
|
| |
|
| [ENTER] Enter | [RETURN] Cancel |
| ||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Set up speakers (Audyssey® Auto Setup)
STEP 4
Calculate
12On the STEP 3 screen, use ui to select “Next →
Calculate”, and then press ENTER.
Measuring results are analyzed, and the frequency response of each speaker in the listening room is determined.
Audyssey Auto Setup | MultEQ |
Calculate
Now calculating
Please wait
0%
•Analysis takes several minutes to complete. The time required for this analysis depends on the number of speakers connected.
The more connected speakers there are, the longer it takes to perform analysis.
14