Connect

•For the method of connecting 5.1-channel speakers, see C page 6 “Connecting the speakers”.

•For the method of connecting the TV, see C page 3 “Connect this unit to the television using an HDMI cable (sold separately)”.

7.1-channel (Surround back speaker) connection

The illustration on the right shows a connection example for performing 7.1-channel playback using the surround back speakers.

To perform 7.1-channel playback using the surround back speakers, set “Pre Assign” to “NORMAL” in steps 3 and 4 for “Set up “Pre Assign”” (vpage 35).

Also use the “Speaker Config.” setting (vpage 55) to set “S.Back” to “2spkrs”.

NOTE

•A power amplifier (sold separately) is required for this connection.

•For speaker cable connections, see C page 6 “Connecting the speakers”.

•Connect so that the speaker cable core wires do not protrude from the speaker terminal. The protection circuit may be activated if the core wires touch the rear panel or if the + and

– sides touch each other (vpage 86 “Protection Circuit”).

•Never touch the speaker terminals while the power supply is connected. Doing so could result in electric shock (When the Setup wizard is running, follow the instructions in the Setup wizard screen for making connections.).

•Use speakers with the speaker impedances shown below.

Speaker terminals

Speaker impedance

FRONT

 

CENTER

6 – 8 Ω

SURROUND

 

Power amplifier

L

R

IN

R L

FL SW

FR

 

C

SL

SR

SBL SBR

31

version Basic

version Advanced

Information