5 Use o p to select the configuration of the connected speakers.
NORMAL Set for connecting the surround back speakers to the FL/SBL/HL and FR/SBR/HR connectors in PRE OUT.
F.HEIGHT Set for connecting the front height speakers to the FL/SBL/HL and FR/SBR/HR connectors in PRE OUT.
FRONT Set for connecting the front speakers to the FL/SBL/ HL and FR/SBR/HR connectors in PRE OUT.
6 Press RETURN to exit the “Pre Assign” setting.
7 | Set up “Channel Select” |
Use ui to select “Channel Select”, and then press
ENTER.
Audyssey Auto Setup | MultEQ |
Preparation
Set the following items if necessary.
Pre Assign
Channel Select
Auto Setup Start
[ENTER] Enter | [RETURN] Cancel |
Channel Select
Surround Back | Measure (2 sp) |
Subwoofer | Measure |
[RETURN] Return
8 Use ui to select a channel.
Surround Select the number of surround back speakers to be
Back used. In this case, go to step 9.
•“Surround Back” can be set when “Pre Assign” is set to “NORMAL”.
Subwoofer Select for no subwoofer to be used. In this case, go to step 10.
36
Set up speakers
9 Use o p to set whether or not a surround back channel is measured.
Measure | Set for measuring two surround back speakers. |
(2 sp) |
|
|
|
Measure | Set for measuring a surround back speaker. |
(1 sp) |
|
| Set for no measuring of a surround back speaker. |
Skip |
10Use o p to set whether or not a subwoofer channel is measured.
Measure Set for measuring a subwoofer.
Skip Set for no measuring of a subwoofer.
11Press RETURN.
Proceed to page 13 STEP 1 Preparation step 6.
NOTE
After performing Audyssey® Auto Setup, do not change the speaker connections or subwoofer volume. In event of a change, perform
Audyssey® Auto Setup again.
version Basic
version Advanced
Information